Wall Panel Forming Machine

Home » Products » Roll Forming Machine » Wall Panel Forming Machine

Features
The wall panel forming machine features high speed, high production, good performance, low labor and is economical. This roll former is the best choice for producing the metal sheet cold roll forming products.

Application
Our wall panel roll forming machine produces different kinds of wall panels. The roll formed panels are primarily used in temporary building sites, steel structure workshops, and other public buildings and feature fast construction speed. Our wall panels are durable, have an attractive appearance, etc.

Flow Chart
Decoiling the sheet---Guiding the sheet---Roll forming---Measuring the length---Cutting the sheet---on the output table

Machine Placement and Operator
The wall panel forming machine should be placed on an even cement floor and lifted with a lifting device with a lifting capacity not less than five tons. The machine requires space for storing materials and laying the machine and enough room for it to operate. The roll forming machine requires one operator and one porter.

Components of Wall Panel Roll Forming Machine

Guiding Table 1 set
Manual Decoiler 1 set
Main Forming Machine 1 set
PLC Control System 1 set
Hydraulic Cutting Station 1 set
Output Table 1 set

Technical Specifications of Wall Panel Roll Forming Machine

NO Model Coil Width (mm) Effec
tive Width (mm)
Profile Drawing
1 25-200-1000 1220 1000
2 15-225-900 1000 900
3 17-175-1050 1200 1050
4 12-176-1056 1200 1056
5 10-102-825 1000 825
6 10-186-930 1200 930
7 19/32''-2½''-30'' 40.875 30''
8 15-217-1085 1200 1085
9 8- 130-910 1000 910

Yx15-225-900

Item Description
Material Width 1000mm
Material Thickness 0.3mm-0.8mm
Material PPGI GI
Yield Stress 235Mpa
Material of Roller 45# steel plated hard chromium 0.05mm
Diameter of Shaft 70mm
Voltage AC380v/50hz or per customer's requirement
Motor Power 4kw
Hydraulic Power 3kw
Stand 13
Control System Mitsubishi PLC frequency conversion
Hydraulic Cutting Material Cr12 heat treatment
Speed 8-15m/min
Decoiler 5 tons manual or hydraulic

C10

Item Description
Material Width 1250mm
Material Thickness 0.3mm-0.8mm
Material PPGI GI
Yield Stress 235Mpa
Material of Roller 45# steel plated hard chromium 0.05mm
Diameter of Shaft 70mm
Voltage AC380v/50hz or per customer's requirement
Motor Power 4kw
Hydraulic Power 3kw
Precision 10m±2mm
Control System Mitsubishi PLC frequency conversion
Hydraulic Cutting Material Cr12 heat treatment
Speed 8-15m/min
Decoiler 5 tons manual or hydraulic

Founded in 1996, we are a China-based wall panel forming machine manufacturer and supplier. Through our years of experience and continued efforts of our dedicated staff, we offer customers a great variety of roll forming machines, like double layer forming machines, tile forming machines, wall panel forming machines, sandwich panel production lines, and others. Our location in Botou City gives us easy access to convenient air, land and sea transportation. This keeps our costs down, and reduces transportation costs for our customers.
If you have a need for any of our products, please feel free to contact us at We . We look forward to working with you.

Feedback Form
Roll Forming Machines
    1. Purlin Forming MachineThe purlin forming machine should be placed on an even cement floor and lifted by a lifting device with a lifting capacity not less than five tons. It requires the space for ...
    1. Roller Shutter Door Forming MachineThe roller shutter door forming machine should be placed on an even cement floor and lifted by a lifting device with a lifting capacity not less ...
    1. Downspout / Gutter Forming MachineDownspout / gutter forming machine is a kind of special metal rolling machine used to produce rainspouts or waterspouts, which can carry water ...
    1. Highway Guardrail Forming MachineThe highway guardrail forming machine should be placed on an even cement floor and lifted by a lifting device with a lifting capacity not less ...